Categorias

Legenda de stocks

Em stock

Artigos disponíveis para levantamento na loja ou expedição.

O artigo foi adicionado ao carrinho com sucesso. Poderá alterar agora a quantidade ou posteriormente no carrinho.

QTD:

SACHTLER System FSB 6 FT 75 MS Carbono
Ref: 12736


DISPONIBILIDADE:

Por Encomenda

Preencha este formulário para receber um e-mail informativo assim que este artigo for colocado em stock.

Descrição
Avaliações (0)

A cabeça fluida FSB 6 com pernas de tripé de fibra de carbono flowtech ™ 75 oferece um sistema de tripé profissional para videografos que usem câmaras que pesem até 8 kg. A cabeça do FSB 6 oferece um arrasto hidráulico à prova de fugas sem fricção e com três níveis de arrasto, para imagens perfeitas durante o pan, sem solavancos e vibrações. Idêntico em planos horizontais e verticais e permite o desengate completo do arrasto para um deslocamento rápido. O sistema inclui um spreader de nível médio e um saco de transporte.

Cabeça fluída FSB 6 + tripé flowtech 75 MS com spreader de nível médio e pés de borracha + saco acolchoado flowtech 75; O flowtech ™ 75 é um tripé de fibra de carbono de 75 mm com dois freios de libertação rápida para abertura imediata e fácil, design de fibra de carbono ergonômico com fechos magnéticos fortes para transporte confortável, excepcional rigidez de torção e um mecanismo de bloqueio de dobradiça versátil para ângulos baixos e altos.



Product Highlights:

  • FSB 6 Fluid Head with Sideload Plate
  • Head with Load Capacity of 1.5 to 8kg
  • For Camcorders, DSLRs & Mirrorless
  • 10-Step Counterbalance
  • Flowtech 75 Carbon Fiber Legs
  • Two-Stage, Three-Section Standard Legs
  • Tripod Supports up to 20kg
  • Height Range Approximately 61 to 155cm
  • Removable Mid-Level Spreader
  • Padded Carry Bag


This Sachtler System FSB 6 Fluid Head with Sideload Plate, Flowtech 75 Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet supports cameras and accessories weighing between 1.5 and 8kg, and is well suited for DSLRs, mirrorless cameras, and small- to medium-sized camcorders. The head features a sliding balance plate with 120mm of adjustment to balance your camera, 10 steps of counterbalance adjustment and 3 steps plus a zero setting of independent pan and tilt drag. This amount of adjustability combines to give you precise control of your camera on the head, and the ability to easily tune your set up on a shot-by-shot basis.

The Flowtech legs are a lightweight set of tripod legs that can be used with or without the included mid-level spreader. The legs support up to 20kg, which means they can easily handle the weight of the FSB 6 Fluid Head with Sideload plate as well as your camera and accessories. The legs extend from approximately two feet to five feet and are extremely resistant to twisting when you pan. Additionally, each leg features a single locking lever near the top that allows you to open the leg sections to raise or lower the leg. The included padded carry bag is for storing or transporting the head and legs.


Video Tripod for Filmmakers! - Sachtler Flowtech 75

The Sachtler FSB 6 is a fluid head designed to work with the handheld size of DV, DVCAM, HVX, and HDV camcorders. This head is the only in its class to feature Sachtler's Sideload mechanism, which boasts an exceptionally large sliding range of 120mm. This ensures extremely fine and fast balancing. The head features 10-step counterbalance adjustment for fine tuning your operating.


Frictionless Leak-Proof Fluid Damping

Frictionless leak-proof fluid damping with five levels of drag, for perfect pictures while panning, without jerks and vibrations. Identical across both horizontal and vertical planes, and allows complete disengagement of drag for fast panning.


Quick Release

The FSB 6 features Sachtler's Sideload mechanism, which boasts an exceptionally large sliding range of 120mm.


SOOM

The FSB 6 features the SOOM modular construction system.


Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet

The Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet eschews the common single or double carbon fiber tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs work weigh just under 3kg yet they can support a payload of up to 20kg, and extend from a minimum height of 61cm to a maximum height of 155cm when using the included removable mid-level spreader. Each leg features a single clamping lever that locks and unlocks the sections.

Each leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground, and you can snap rubber feet onto the dual spikes for better grip when working on hard or delicate surfaces.


Features

  • Dual-stage, carbon fiber, 75mm bowl tripod
  • Weighs only 2.9kg pounds but supports up to 20kg
  • The design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.
  • The included mid-level spreader allows you to work on uneven terrain such as stairs or rocks while preventing the legs from flying apart. When using the mid-level spreader, you can use the included rubber feet to protect delicate surfaces from the tripod's foot spikes.
  • Each leg features a single clamping lever lock design at the top of the leg, near the 75mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don't have to bend down to loosen a leg lock at the bottom to lower or raise the legs.
  • The legs incorporate a locking mechanism that enables the legs to move completely freely, suitable when working with a spreader, or to lock at one of three angles, suitable for use when working without a spreader.
  • When closing the legs, there is room for the mid-level spreader to be folded up while remaining attached. The legs feature a magnetic locking system strong enough to hold them together during transport, but allows you to easily release the legs when you want to set them up.


Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head
With dimensions of 93 x 20 x 23cm, this Padded Bag from Sachtler is designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks.

The bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.

  • Padded bag with dimensions of 93 x 20 x 23cm, designed for carrying a flowtech 75 or TT tripod with an FSB fluid head
  • 900D water-resistant fabric on the exterior, with layers of foam to help cushion gear against bumps
  • Full-length zipper allows for easy access to the interior compartment
  • Connecting hand straps, side handles, and D-rings available for transport
  • Clear plastic window on one of the sides allows you to insert a name tag for easy identification


0407 FSB 6 Fluid Head with Sideload Mechanism

Camera Plate

Camera Plate Features

Sliding Balance Plate, Quick Release

Balance Plate Sliding Range

120 mm

Tripod Platform

Base Mount

75 mm Half Ball

Pan & Tilt

Drag Control

Tilt: 3-Step Plus 0

Vertical Tilt

+90° to -75°

Panning Range

360°

Independent Pan Lock

Yes

Independent Tilt Lock

Yes

Physical

Load Capacity

1.5 to 8 kg

Counter Balance

Incremental 10-Step

Bubble Level

1 x Illuminated

Operating Temperature

-40 to 60°C

Weight

2.6 kg

    Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet

    General

    Head Mount Type

    75 mm Bowl

    Load Capacity

    20 kg

    Maximum Working Height

    153 cm

    Minimum Working Height

    26 cm

    Folded Length

    68 cm

    Materials

    Aluminum, Carbon Fiber

    Weight

    2.9 kg

    Legs

    Leg Lock Type

    Flip Lock

    Leg Sections

    3

    Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head

Exterior Material

Nylon

Padded

Yes


In the Box
Bundle Items
0407 FSB 6 Fluid Head with Sideload Mechanism
Fluid Head
Pan Bar
Quick Release Camera Plate
Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet
Mid-Level Spreader
3 x Removable Rubber Feet
Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head

In the Box:

  • Bundle Items
  • 0407 FSB 6 Fluid Head with Sideload Mechanism
  • Fluid Head
  • Pan Bar
  • Quick Release Camera Plate
  • Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet
  • Mid-Level Spreader
  • 3 x Removable Rubber Feet
  • Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head



 

Saiba a opinião dos nossos clientes sobre este artigo e deixe-nos também a sua avaliação.